Our strong cationic resins are the backbone of our treatment applications, ensuring unparalleled quality and effectiveness.
AMF - AAC Domestic Light Industrial Series Filtration Systems
The AMF-AAC series filters are specifically designed to eliminate suspended solids, particulates, iron, and manganese, as well as taste, odour, organic compounds, and colour from water. These filters are typically utilized in both process and potable water systems.
We use Fully Automatic Valve Systems that comprise Quartz Sand, Garnet, anthracite, and activated carbon to filter water under 10-20 microns. The choice of filtration minerals is based on the analysis of the raw water. We use a special mineral to remove Iron and Manganese.
General Specifications
- Fully Automatic Operation
- Pressure Vessel made from composite material
- Minimum commissioning costs
- Operating Temperature 4 -40 °C
- Time Control Backwash
- Power Supply 220 V- 50Hz
- Low Energy Consumption
- Capacity between 0,5- 35 m3/h
Optional Specifications
- Special Systems for high-Pressure applications
- Galvanize or Stainless-steel Tanks
- Pressure or hardness-controlled backwash
- Stainless steel Piping
- Electric Actuator Valves
- High-density corrosion-resisted composite pressure vessels and minerals are used, which are suitable for potable water applications at AMF – AAC series Filtration systems.
VMF Series Multimedia Filtration Systems
Multimedia Filters are essential for eliminating suspended solids, particulate matter, iron, and manganese from water in order to guarantee clean drinking water.
To ensure water is filtered under 10-20 microns, the initial and essential stage in any water treatment system involves using filters made of Quartz Sand, Garnet, and anthracite.
Selecting the appropriate minerals for filtration is crucial and should be based on an analysis of the raw water. Specifically, a particular mineral must be employed to eradicate Iron and Manganese.
General Specifications
- Operating pressure 2-8 bar
- ST-37 carbon steel-coated Epoxy
- Fully automatic systems
- Minimum commissioning costs
- PVC Diaphragm valve
- Operating Temperature 4 -50 °C
- Time Control Backwash
- Power Supply 220 V- 50Hz
- Low Energy Consumption
- Capacity between 30- 300 m3/h
Optional Specification
- Special Systems for high-Pressure applications
- Special Systems for high-Temperature applications
- Galvanize or Stainless-steel Tanks
- Pressure or capacity-controlled backwash
- Stainless steel Piping
- Electric Actuator Valves
VAC Series Activated Carbon Filtration Systems
Activated Carbon Filters are specifically designed to eliminate the taste, odor, organic compounds, and color of water. These filters are commonly used in both process and potable water systems. Coconut-based activated carbon is typically utilized in Activated Carbon Filtration Systems. The mineral filters are customized based on raw water analyses. The Standard Models of these filters are non-bypass types. However, Bypass models are also available that can supply untreated water to the system during backwash.
General Specifications
- Operating pressure 2-8 bar
- ST-37 carbon steel-coated Epoxy
- Fully automatic systems
- Minimum commissioning costs
- PVC Diaphragm valve
- Operating Temperature 4 -50 °C
- Time Control Backwash
- Power Supply 220 V- 50Hz
- Low Energy Consumption
- Capacity between 30- 300 m3/h
Optional Specifications
- Special Systems for high-Pressure applications
- Special Systems for high-Temperature applications
- Galvanize or Stainless-steel Tanks
- Pressure or capacity-controlled backwash
- Stainless steel Piping
ASS - ASSD Domestic Light Industrial Series Water Softening Systems
If your water is hard, it can cause energy loss and increase consumption in heaters, hot water installations, and steam cauldrons because of limescale buildup. To combat this, ASS series water softeners offer a single type of softening, while the ASSD series provides duplex options. These systems use fully automatic valves and can be controlled based on time or volume.
General Specifications
Fully Automatic Operation
Pressure Vessel made from composite material
Minimum commissioning costs
Operating Temperature 4 -40 °C
Time Control Backwash
Power Supply 220 V- 50Hz
Low Energy Consumption
Capacity between 0,5- 50 m3/h
Optional Specifications
- Special Systems for high-Pressure applications Galvanized or Stainless-steel Tanks Pressure or heaviness-controlled backwash.
- Stainless steel Piping.
- Electric Actuator Valves
VSS - VSSD Industrial Series Water Softening Systems
Water softening systems are created to eliminate water hardness caused by calcium and magnesium, using strong cationic resins. Hard water can lead to energy loss and increased consumption, particularly in heaters, hot water, and steam cauldrons due to the formation of limescale.
The VSS series includes single-type water softeners, while the VSSD series comprises duplex-type water softener systems. For high water usage, unique systems can be designed. Fully automatic valves or PLC-controlled valves can be used, depending on the system capacity. The systems can be controlled by time, volume, or hardness with the use of a hardness monitor.
General Specifications
- Operating pressure 2-8 bar
- ST-37 carbon steel-coated Epoxy
- Minimum commissioning costs
- PVC Diaphragm valve
- Operating Temperature 4 -50 °C
- Time Controlled Backwash
- Power Supply 220 V- 50Hz
- Low Energy Consumption
- Capacity between 30- 300 m3/h
Optional Specifications
- Special Systems for high-Pressure applications
- Special Systems for high-Temperature applications
- Galvanize or Stainless-steel Tanks
- Pressure or hardness-controlled backwash
- Stainless steel Piping
- Electric Actuator Valves
- Fully automatic valves